Wykamol Technoseal DPM 5L

Technoseal DPM is a ready to use liquid vapour, damp and waterproof membrane which provides a seamless coating and barrier, ideal for use above or below ground  on a number of different substrates and materials. Technoseal is a water based, SBR latex coating/membrane.

Technoseal acts as a barrier against vapour, damp and water. It is safe to use
in portable water and can be applied to pond lining as a waterproof barrier.
Ideal for areas with constant water contact, such as under tiles in bathrooms, food processing areas and balconies.

product colours

This product comes in black and and white variants 

product size

This product comes in a 5 litre box

ADVANTAGES
• Single pack system
• Water based compounds that can be applied even to damp backgrounds.
• Non-toxic, non hazardous, solvent and plasticiser free.
• Tough, high flexibility, extensibility and good crack bridging properties.
• Low water vapour permeability.
• Alkali resistant, can be applied to alkaline surfaces.
• Resistant to silage acids.
• Non staining and stain blocking.
• Quick drying. Typically touch dry in 1 hour.

TYPICAL USES
Multi purpose waterproofing paint system for foundation walls and floor slabs.
Non hazardous

SUBSTRATE PREPARATION
1. The substrate should be smooth or have a light, even texture.
Any masonry should be flush pointed and defects in existing
surfaces made good.
2. Ensure surface is clean, sound and free of dust, loose materials
or surface water, but damp substrates are acceptable. It is
sometimes advantageous to pre-wet concrete or masonry
substrates before application.
3. Test adhesion to substrate using a sample area before
commencing application.

Vigorously brush the first coat into the background concrete
using a stiff bristled brush.
OR
• Prime the roof with a slurry of SBR Latex, if using roller, or an
airless spray application method. Allow the slurry to harden
for 2 days before applying Technoseal.

CONSTRUCTION JOINTS
In some situations, e.g. at high stress points such as wall/floor
junctions, construction, movement or expansion joints, the
Wykamol Proflex Tape system should be used, please refer to
our Proflex data sheets for more information and installation
guidelines.

CURING
Touch dry within 1 hour the Initial cure within 24 hours and full
cure is 4 days.
CLEANING EQUIPTMENT
All tools should be cleaned with water immediately after use.