Wykamol EP40 Epoxy Floor Coating

EP40 Epoxy Floor Primer is designed to soak into the substrate, block pores,
improve adhesion and ensure an even, high quality finish. After the final application of EP40 Epoxy Finish Coat, floors become easier to clean with a hard wearing, dust free, waterproof, impervious finish and are substantially more resistant to damage by chemicals, fuels and lubricants.

Colours Of This Product

The colours of this product are Grey or Clear

The Finish Of This Product Is Either

Finish Or Primer

ADVANTAGES
• Easy to apply.
• Excellent adhesion to concrete.
• Provides attractive, dust free finish.
• Substantially more resistance to chemicals, fuels and lubricants.
• Can be used internally and (externally if covered).
• Ideal for areas with high foot traffic.
• Can be applied to green concrete after 7 days.
• Floor becomes easier to clean with impervious finish.

TYPICAL USES
Over concrete floors in a variety of commercial and industrial environments, such as:
Industrial plants, Commercial and retail stores, Warehouses, Hospitals, Showrooms,
Garages, Gymnasiums, Industrial food preparation areas.

SUBSTRATE PREPARATION
All substrates should be dry, clean and free from laitance, oil, grease and other contaminants. Ideally, concrete surfaces should be vacuum shot blasted or mechanically abraded (grinding) to both clean and open the surface, providing a good mechanical key.

Please note: Following sufficient substrate preparation, EP40 Epoxy Floor Primer should always be applied prior to the to the application of either the grey or clear finish coat. Substrate humidity should be ≤ 80% before application commences. The concrete subbase must be ≥ 25 N/mm² as per BS 8204-6. The subbase must be level and have no more than 2 mm undulations. If floor unevenness is significant a polymer modified C35 screed can be used to level.